Terrazzo Repair Visit Estimator

This estimator is for a terrazzo floor that is already bare and polished and needs specific repairs: a few holes or cracks filled, a stained spot or two treated, or the sealer renewed. Count what you have, and the range comes from the pricing page. For example, one or two patches and nothing else is the visit minimum, $600 to $1,000; add one stain and a one-room reseal and it becomes $1,050 to $2,200.

Read the minimum honestly

The $600 to $1,000 minimum is what a repair visit really costs: getting people, a grinder, water, chips, matrix and sealer to your house. It covers the first one or two patches in this tool, and it is the same whether you have one hole or two. The practical advice follows from that: batch every repair in the house into one visit, or fold the repairs into a full restoration, where they cost the same per patch and the minimum is absorbed by the bigger job.

What each answer changes

Patches are the core line, at $75 to $250 each beyond the first one or two. A small hole sits at the bottom; a crack cut out and filled with chips sits at the top. The cracks page explains which cracks need what.
Stains are $150 to $600 per area and only for marks that need a poultice. On a repair visit there is no full grind to take off shallow marks, so anything you can see is counted here. The pet stains page is honest about which ones fade and which stay.
Sealing is $1.50 to $3 per square foot and only belongs on a floor that has already been ground and polished. The water-drop test on the sealing page tells you whether yours is due.

The honest limit of a repair-only visit

A patch is filled proud, left to cure, then ground flush. On a repair visit that grinding is local, so the patched area ends up at a slightly different polish from the floor around it, and you can find the edge if you look. The NTMA’s restoration specification also says color matching existing aggregates may not be exact, since marble is a mined product, and recommends a mock-up first. On a patch in the middle of a living room, we show you a sample before filling.

If you expect to restore the whole floor within a few years, the repairs are worth waiting for. If the floor is in good shape and you need two holes gone, this is the right visit.

What is not in this tool

Tack-strip perimeters, which are priced per room after a look. See the tack-strip holes page.
Hollow or loose sections, which are mapped and quoted. See hollow-sounding terrazzo.
Wall gaps, which are long fills priced after a look. See the wall gap page.
Anything still covered, which belongs in the floor cost estimator.

Send a photo of each repair with a coin beside it and we will confirm the count and the number, from the same table you see here.

Estimator

What will a terrazzo repair visit cost?

For a floor that is already exposed and polished and needs fixing, not a full restoration. Three questions, priced from our pricing page.

How many holes or cracks need filling? How many stained areas need a poultice? Reseal the floor while we are there?

Estimated range Typical Tampa pricing, before anyone visits

Resealing only makes sense on a floor that has already been ground and polished. A full room of tack-strip holes is priced per room after a look and is not in this tool. Patches on a repair visit are ground flush locally and will show more than patches done during a full grind.

Send this estimate to the quote form

A typical range, not a quote. Patch and stain counts are confirmed once we can see the floor, and the firm number is written down before work starts.

Frequently Asked Questions

When should I use this instead of the floor cost estimator?

Use this one when the terrazzo is already bare and polished and only needs specific repairs, stain work or a reseal. If the floor is still covered, dull, coated or glued, the floor cost estimator is the right tool, and repairs cost less folded into that job.

Why does a small repair have a minimum?

Because getting a crew, grinders, water and materials to your house costs nearly the same for two patches as for ten. Our typical minimum for a single room or a repair-only visit is $600 to $1,000, and it usually covers the first one or two patches. Batch every repair in the house into one visit.

Will a repaired patch match the rest of the polished floor?

It will be close, and it will show up close. A patch has to be ground flush once it cures, and grinding a small area leaves it at a slightly different polish from the floor around it. The NTMA also notes that matching existing chips may not be exact because marble is a mined product.

Can I just reseal a dull floor instead of polishing it?

Not usefully. A sealer protects a polished surface; it does not make a dull one shiny, and sealing over etching or old coating locks the problem in. A light hone and polish, typically $3 to $5 per square foot, has to come first.